服务热线: 400-117-8816 

专注于扭剪型电动扳手、扭剪型手动扳手、定扭矩电动扳手、扭矩倍增器的研发与生产

热门关键词: 大扭矩电动扳手使用说明,会操作了吗? 桥梁施工用定扭矩电动扳手介绍 气动扳手和扭剪扳手有什么区别? 扭剪扳手的维修方法有哪些?

当前位置:河南11选5>技术文献>气动扳手和扭剪扳手有什么区别?

气动扳手和扭剪扳手有什么区别?

来源:http://ssshicai.com/ 日期:2019-05-28 发布人:admin

  气动扳手和扭剪扳手有什么区别?如果电动扳手螺丝松了怎么办?电机碳火花异常的原因是什么?如何解决电动扳手不能正常使用的问题?不要害怕。你只需要知道这些。

  What's the difference between pneumatic wrench and torsion wrench? What if the screw of electric wrench is loose? What's the cause of abnormal carbon spark of motor? How to solve the problem that electric wrench can't be used properly? Don't be afraid. You just need to know that.
  ▼
  A kind of
  定义
  Definition
  扭剪扳手是一种供电源或蓄电池作动力的扳手,是一种拧紧高强度螺栓的工具,又称高强度螺栓枪。它主要分为冲击扳手、扭剪扳手、定扭矩扳手、角扳手、角扳手。
  Torsion shear wrench is a wrench powered by power supply or battery. It is a tool for tightening high strength bolts, also known as high strength bolt gun. It is mainly divided into impact wrench, torsion shear wrench, fixed torque wrench, angle wrench, angle wrench.
  ▼
  A kind of
  气动扳手、电动扳手
                 扭剪扳手
  Pneumatic wrench, electric wrench
  电动扳手是电源或蓄电池供电的扳手,是拧紧螺栓的工具。它主要用于钢结构安装行业,特别是用于钢结构高强螺栓的安装,高强螺栓用于连接钢结构的触点,通常采用螺栓组的形式。
  Electric wrench is a wrench powered by power or battery and a tool for tightening bolts. It is mainly used in the steel structure installation industry, especially for the installation of high-strength bolts in steel structures. High-strength bolts are used to connect the contacts of steel structures, usually in the form of bolt groups.
  气动扳手又称棘轮扳手和电动工具总成,主要是一种以最小的消耗提供高扭矩输出的工具。它利用连续的动力源来加速具有一定质量的物体的旋转,然后瞬间击中输出轴,从而获得较大的扭矩输出。压缩空气是最常见的动力来源,尽管有些使用电动或液压。
  Pneumatic wrench, also known as ratchet wrench and electric tool assembly, is mainly a tool to provide high torque output with minimum consumption. It uses a continuous power source to accelerate the rotation of a body with a certain mass, and then instantaneously hits the output axis to obtain a larger output of torque. Compressed air is the most common source of power, although some use electric or hydraulic power.
  此外,气动扳手可在每一个标准棘轮套筒驱动器大小,从一个小的1/4 ""驱动套件套件安装和拆卸到3.5" "。气动扳手一般不适用于陶瓷和塑料安装件的紧固。
  In addition, the pneumatic wrench can be installed and disassembled from a small 1/4"drive kit to 3.5" for each standard ratchet sleeve drive size. Pneumatic wrenches are generally not suitable for the fastening of ceramic and plastic fittings.
  ▼
  A kind of
  电动扳手的螺丝松了
  The screw of the electric wrench is loose如果发现螺钉松动,应立即拧紧,否则会导致电动扳手失效。
  If the screw is loose, it should be tightened immediately, otherwise the electric wrench will fail.
  ▼
  A kind of
  电机碳火花异常
    
  Abnormal Carbon Spark of Electric Machine应立即停止工作,检查处理情况,检查碳刷是否清洁。依次解决。
  Work should be stopped immediately to check the treatment and the cleanliness of carbon brushes. Solve it in turn.
  ▼
  A kind of
  出故障了
  It's out of order.
  确认现场连接的电源是否与电动扳手铭牌一致。是否有漏电保护器连接?如无异常或不使用,应送品牌维修店检查。
  Verify that the power supply connected on site is consistent with the nameplate of the electric wrench. Are there leakage protector connections? If there is no abnormality or no use, it should be sent to the brand repair shop for inspection.
 

江苏11选5 湖南幸运赛车 广西11选5 江苏11选5 江苏快3 广西11选5 福建11选5 上海时时乐 山东十一运夺金 广东11选5